NIPPON PAINT

Nippon Paint Aqua Bodelac 9052 Gloss White 1L

Nippon Paint Aqua Bodelac is a water-based modified acrylic gloss enamel wood and metal paint with low Volatile Organic Compound (VOC) and extremely low odour during application and drying.

Use This Paint If…
– You are sensitive to paint odours
– You do not want to worry about the growth of fungus on your surfaces
– You want an excellent wood and metal paint that is hassle-free and easy to wash-up

Where Can You Use It?
On doors, architraves, windows and timber trims, skirting boards and high traffic masonry surfaces.

EAN Code: 8888866254513

Product Code: NP-AQB-9052-1L

How to Request For A Quotation?

Step 1: Input the quantity of the product you would like to get a quotation on

Step 2: Add the products you would like to get a quotation on into your cart by clicking on the “ADD TO BAG” button

Step 3: Once you are done adding in all the products you would like to get a quotation on, go to the cart (shopping bag icon on the top right corner) and click on the “PROCEED TO CHECKOUT” button

Step 4: Fill in the details required for a quotation (If you have any questions/comments, feel free to add them into the order notes box) and click on the “PLACE ORDER” button

We will be in contact with you shortly via email, once you have successfully submitted your quotation request!

Benefits

Excellent washability
Good coverage and hiding power
Non-yellowing

Features

Alkaline resistant
Anti-bacterial
Anti-fungus
Easy application and fast drying
Excellent blocking resistance
Heavy metal free
No lead or mercury added
Non-toxic

Finish

High Gloss / Matt

Application Data

Method: Roller or brush
Theoretical Coverage: 15-17 m2 / litre depending on surface texture, substrate porosity and method of application
Drying Time: Surface Dry – 30 minutes at 30°C and Hard Dry – 2 hours at 30°C
Overcoating Time: Minimum 3 hours based on normal conditions

Surface Preparation

Ensure surface is clean, dry and stable using the following suggested surface treatments:

Masonry
– Moisture: There must not be any water residue on the surface of the substrate. Moisture must be <4% (Sovereign moisture master) before application
– Unstable matter: Remove loose bonding film, dirt, peeling paint, etc by high-pressure water jet wash or mechanical means such as power brush or scraper, whichever is suitable
– Contaminants: Remove dust and foreign matter by cleaning with damp cloth. Remove oil or grease using solvent or mild detergent. Allow surface to dry
– Fungus and Algae: Wash the affected area to remove unstable matters and micro-organisms. Apply Anti-Fungus Solution and leave on for at least 2 hours
– Hairline cracks: Fill cracks with suitable exterior grade water-resistant putty or filler

Metal
The surface of the substrate must be:
– Clean/Dry
– Free for grease/oil
– Free from rust/foreign matter
– Free from unstable old film

Exposed metal must be primed with:
– Non-ferrous: Hi-Vinyl 1102 CF Etching Primer
– Ferrous: Aqua Primer Sealer Undercoat

Wood
– Prepare by sanding to establish a smooth clean surface which is then applied with 1-2 coats of Aqua Primer Sealer Undercoat depending on wood species.