Nippon Paint Odour-Less Ultra 5102 Sealer 1L
Nippon Paint Odour-less Ultra Sealer 5102 is a high quality, water-based, environmentally favorable product with low odour and VOCs (Volatile Organic Compounds) during application and drying. It is formulated for use on interior and exterior masonry surfaces to resist alkaline attack and provide good substrate adhesion for subsequent topcoats.
Use This Paint If…
– You are sensitive to paint odours
– You want to prevent alkaline attack to achieve vibrant accent colour
– You want excellent adhesion on masonry surfaces
Where Can You Use It?
On interior masonry surfaces such as concrete/cement, fiber-cement panels and partition panels/plasterboards as a sealer.
EAN Code: 8888866393755
Product Code: NP-5102-SEALER-1L
How to Request For A Quotation?
Step 1: Input the quantity of the product you would like to get a quotation on
Step 2: Add the products you would like to get a quotation on into your cart by clicking on the “ADD TO BAG” button
Step 3: Once you are done adding in all the products you would like to get a quotation on, go to the cart (shopping bag icon on the top right corner) and click on the “PROCEED TO CHECKOUT” button
Step 4: Fill in the details required for a quotation (If you have any questions/comments, feel free to add them into the order notes box) and click on the “PLACE ORDER” button
We will be in contact with you shortly via email, once you have successfully submitted your quotation request!
- Anti-mould
- Good alkaline and efflorescence resistance
- Almost no paint odour
- Fast drying time
- Free from Alkylphenol Ethoxylate (APEO) & formaldehyde
- Does not contain heavy metals
- Easy application
- Does not contain lead and mercury
- Environmentally friendly paint certified under the Singapore Green Building Product Certification Scheme
- Matt
- Method: Roller or brush
- Theoretical Coverage: 10 – 12m² /litre (30 μm DFT/coat), depending on surface texture, substrate porosity and method of application
- Drying Time: Surface Dry – 30 minutes at 30°C and Hard Dry – 1 hour at 30°C
- Overcoating Time: 2 hours based on normal conditions
Ensure surface is clean, dry and stable using the following suggested surface treatments:
- Moisture: There must not be any water residue on the surface of the substrate. Moisture must be <4% (Sovereign moisture master) before application
- Unstable matter: Remove loose bonding film, dirt, peeling paint, etc by high-pressure water jet wash or mechanical means such as power brush or scraper, whichever is suitable
- Contaminants: Remove dust and foreign matter by cleaning with damp cloth. Remove oil or grease using solvent or mild detergent. Allow surface to dry
- Fungus and Algae: Wash the affected area to remove unstable matters and micro-organisms. Apply Anti-Fungus Solution and leave on for at least 2 hours
- Hairline cracks: Fill cracks with suitable exterior grade water- resistant putty or filler





