Nippon Paint Vinilex 5170 Wall Sealer 5L
Nippon Paint Vinilex 5170 Oil-Based Wall Sealer contains a superior resin/binder, effective in preventing the degradation of finishing coats by alkaline surfaces. This wall sealer contains a blend of solvents that enables it to penetrate deeply and gives a firm base for subsequent coats.
Use This Paint If…
– You want to achieve a visibly smoother surface and better-looking result
– You do not want to risk your paint flaking or peeling
– You want to prevent chalking
Where Can You Use It?
As a sealer for internal and external masonry surfaces such as cement plaster, brickwork, hard/soft boards, gypsum and concrete.
EAN Code: 8888866106195
Product Code: NP-5170-SEALER-5L
How to Request For A Quotation?
Step 1: Input the quantity of the product you would like to get a quotation on
Step 2: Add the products you would like to get a quotation on into your cart by clicking on the “ADD TO BAG” button
Step 3: Once you are done adding in all the products you would like to get a quotation on, go to the cart (shopping bag icon on the top right corner) and click on the “PROCEED TO CHECKOUT” button
Step 4: Fill in the details required for a quotation (If you have any questions/comments, feel free to add them into the order notes box) and click on the “PLACE ORDER” button
We will be in contact with you shortly via email, once you have successfully submitted your quotation request!
- Algae resistance property
- Efflorescence resistance to prevent discolouration
- Prevents resurfacing of stain marks on problem substrates
- Ideal for exterior surfaces
- Oil-based
- Matt
- Method: Roller, brush or spray
- Theoretical Coverage: Approx. 16 m2 / litre
- Drying Time: Surface Dry – 20 minutes at 30°C and Hard Dry – 2 hours at 30°C
- Overcoating Time: 5 hours under normal conditions
Ensure surface is clean, dry and stable using the following suggested surface treatments:
- Moisture: There must not be any water residue on the surface of the substrate. Moisture must be <4% (Sovereign moisture master) before application
- Unstable matter: Remove loose bonding film, dirt, peeling paint, etc by high-pressure water jet wash or mechanical means such as power brush or scraper, whichever is suitable
- Contaminants: Remove dust and foreign matter by cleaning with damp cloth. Remove oil or grease using solvent or mild detergent. Allow surface to dry
- Fungus and Algae: Wash the affected area to remove unstable matters and micro-organisms. Apply Anti-Fungus Solution and leave on for at least 2 hours
- Hairline cracks: Fill cracks with suitable exterior grade water-resistant putty or filler





