0
0
PYLOX
Pylox Spray Paint 03 Matt White 400CC
Pylox Spray Paint is a modified acrylic-based aerosol paint that is specially formulated for decorative and protective purposes. It is suitable for both interior and exterior surfaces
Use This Paint If…
– You are looking to restore or transform surfaces for a fresh new look
– You want a quick and easy method to add colour to any projects
– You want a spray paint that beautifies and protects surfaces at the same time
Where Can You Use It?
– Metal, timber and paper surfaces for decorative purposes.
– Fluorescent colours can be used on traffic signs, car and ship signboards, signs for firefighting vehicles, facilities and other safety notices.
EAN Code: 8888866702472
Product Code: NP-PLX-03
How to Request For A Quotation?
Step 1: Input the quantity of the product you would like to get a quotation on
Step 2: Add the products you would like to get a quotation on into your cart by clicking on the “ADD TO BAG” button
Step 3: Once you are done adding in all the products you would like to get a quotation on, go to the cart (shopping bag icon on the top right corner) and click on the “PROCEED TO CHECKOUT” button
Step 4: Fill in the details required for a quotation (If you have any questions/comments, feel free to add them into the order notes box) and click on the “PLACE ORDER” button
We will be in contact with you shortly via email, once you have successfully submitted your quotation request!
- Extremely fast curing
- Good adhesion on various surfaces
- Good film properties
- Excellent colour retention
- Multipurpose
- Ozone-friendly (CFC-free)
- Easy application
- Non-toxic
- Excellent colour uniformity
- Washable
- Gloss finish comes in a wide selection of colours, available in metallic, pearl, silver and gold colours
- Fluorescent range glows brilliantly when struck by sunlight and effective over a year. This effect is able to last longer when used indoors
- Matt to Gloss
Method: Spray
Theoretical Coverage:
– Wood surface – 0.4 – 1.0 m2 / 400cc (3 passes per coat)
– Metal surface – 0.8 – 1.6 m2 / 400cc (3 passes per coat)
Drying Time: Hard Dry – 30 minutes at 30°C
Spray Application:
– Shake container vigorously for at least 30 seconds before use.
– Hold can approximately 30 cm from the surface to be sprayed on.
– While spraying, keep can in horizontal motion so that coating is deposited evenly. Do not permit paint to build up.
– Spray several thin coats, instead of one heavy coat, and allow each coat to cure for at least 10 minutes.
– For Fluorescent range, if the surface is not white-based, a coat of Pylox White is recommended to bring out the fluorescent effect.
- Steel: The surface must be clean and dry, free from grease and oil prior to the application. Sand to improve adhesion
- Light Metal and Alloys: Chemical treatment is necessary prior to the application. Sand to improve adhesion
Related Brands
